• 2" taller than current +2" Sweeper bars
• The throttle grip end is notched and the bar is milled for internal wiring to accommodate the electronic throttle control sensor unit (can also be used on pre-2008 models)
• Cable changes may be required; wire extension for the ETC may or may not be needed
• Dimpled and knurled
• Made in the U.S.A.

END RISE 11-1/4"
WIDTH 34-1/2"
CENTER WIDTH 12"
PULLBACK/SWEEP 9"

1982-2020 Harley-Davidson Touring FLH/T