FEULING^® camshaft kits for Milwaukee Eight engines include chain drive camshaft, lifters and a cam installation kit that includes cam bearing, cam/crank hardware and a gasket/O-ring kit that allows for install of the factory one piece pushrods and or our optional and recommended heavy duty HP+^® 0.165 wall one piece pushrods - see part# FMC-4087

Feuling fastener kit part# FMC-3047 is also highly recommend to help prevent cylinder head cracking, this kit replaces the rocker shaft bolts with studs and nuts to help reduce the stress on the rocker shaft standoffs.

HP+^® kits come with HP+^® lifters and RACE SERIES^® kits come with RACE SERIES^® lifters

592 CAM - The big nasty Put your big boy pants on get serious with bore size, ported cylinder heads and throttle body. Aggressive camshaft requiring high lift and higher load valvesprings, performance pushrods and lifters. High flow air cleaner and triple stepped exhaust pipe highly recommended. FEULING also recommends matching this cam with our RACE SERIES oiling system part# FMC-7097 or part# FMC-7099. High lift High Load valve springs are required, see FEULING BEEHIVE valve spring kit part# FMC-1207. Heavy duty pushrods are highly recommended see part# FMC-4087.

1348 RPM range 2,850 - 6,250. Grind: 592

Valve Lift Open Close Duration @ 50 Lobe Centerline
Intake .578 20 34 234 97 
Exhaust .592 68 16 264 116
Overlap: 36

Cam specs measured on the lifter @ 0.050 lift with 1.61 rocker arm ratio