IN BRAND NEW CONDITION

Part # 35246

Fits: Most Harley or custom frames with 1" stem

• Fully assemblee with in-line top bracket without built in rake (0 degree rake)
• The standard length springer (20" measured from the bottom of lower tree to the axle center) is comparable to vintage FL model fork length
• 1" O.D. steering stem designed for Timken type bearings
• Use our Part MU-36652 neck cup conversion kit to install springer on K Model and Sportster 1952/1981
• Measures 8 3/4" between the axle rockers
• Cast rockers
• Includes 3/4" O.D. axle
• Riser mounts are on 4 3/4" centers and threaded 1/2-20
• Universal brake rod mount is on the right rear leg for disc brakes - 5/8" hole

LENGTH: 18''  (CENTER OF AXLE TO BOTTOM OF LOWER TREE OR 19" TO WHERE TREE SITS AGAINST THE BEARING)

TOTAL LENGTH: 28"-29"

NECK STEM: 1" 

INSIDE WIDTH OF ROCKERS: APPROX. 8-1/4"

AXLE DIAMETER: 3/4" O.D.

Note: Installation On Some Stock Models Like Dyna, Touring, Sportster, Etc May Require Frame And/Or Tank Modification As Well As Replacement Of Other Components.

Note: If Using An Aftermarket/Custom Frame With External Neck Cups You May Have To Lathe Or Trim The Springer Retaining Nut Down For Proper Fitment Of Top Tree Clamp And Crown Nut!