4402936/4402936
S&S Cycle 635 HO EZ Easy Start Gear Drive Cams .635 Lift Harley Twin Cam 07-16 | 330-0339
- Brand S&S Cycle
- Model 4402936
- Availability In Stock
IN BRAND NEW CONDITION
PART # 330-0339
DRAG PART # 0925-0834
TUCKER PART # 483992
Fits: 2006-2015 Harley-Davidson Dyna Models and 2007-2015 Harley-Davidson Twin Cam FLH/FLT Softail Models
- Start any engine regardless of displacement or compression ratio with a stock starter
- Save your starter and battery; tested for 10,000 starts without running battery down
- Allow for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance
- All gear-drive cams include 4-gear set and installation kit
- Gear-drive cams also available with inner gears only; intended for cam replacement for motors that have already been converted to an S&S gear-drive system
- Made in the U.S.A.
635 H.O. CAMS
- RPM range 4000-6500
- High-power cam for modified engines, increase compression, high lift springs and large bore throttle body required
- For best results, requires ported heads and low restriction intake/exhaust
| Grind | Open | Close | @ .053 | Valve Lift |
635 HO EZ Start |
||||
| Intake | 19.5° | 58.5° | 243° | .635 |
| Exhaust | 43.5° | 37.5° | 276° | .635 |
| Grind | Open | Close | @ .053 | Valve Lift |
Stock Carburetors/Injected Cams |
||||
| Intake | -02° / 02° | 38°/34° | 216°/216° | .473 |
| Exhaust | 36 Degree | 04/04 Degree | 220/220 Degree | .473 |